What do you need to do to start painting?  With our Painting Company Parker, all you need to do is make a phone call.
However, here are some steps you don’t want to miss. If your paneling has a rough finish, you will need to sand it down before you begin priming and painting. An electric palm sander is the best tool for this job because it can quickly and efficiently sand large areas. Make certain that you wear eye protection and a mask to prevent dust and debris from getting into your eyes and nose. Sand the paneling thoroughly until it is completely smooth to the touch
After sanding, you will then need to clean the paneling thoroughly. To do this you will need to purchase a good cleaning product that is designed for this type of project. You can buy this type of cleaner at most paint or hardware stores. Painting Company Parker is an easy way to avoid the mess, There are several cleaners that come in a spray form so that all you need to do is spray the cleaner on and allow it to sit on the surface of the paneling for a few minutes and then clean with a scouring pad. You should clean the paneling as well as possible because this is a very important step in order to insure that the paint adheres properly.
Painting Company Parker is an easy way to avoid the mess, The next step is to apply an oil based stain blocking primer. Apply the primer using a brush and roller. Using the brush to cut in around the corners and trim and prime into the grooves of the paneling. After you finish cutting out the room with the primer you can then roll out the remaining areas. You can have the primer tinted when you purchase it so that it matches your topcoat. Doing this makes it much easier to cover over the primer when you begin painting. Permit the primer to dry completely before you begin painting. Most primers will dry in a couple of hours or less.
Painting Company Parker is an easy way to avoid the mess, Before you begin painting, you will need to caulk any gaps in the paneling after you finish priming. Cracks that were unseen before are revealed once the primer is applied. Use wood putty to fill in any nail holes. I don’t recommend trying to caulk the grooves in the paneling.You can now begin to apply your paint. Apply two coats of a good quality latex paint using the same method that you applied the primer, allowing it to completely dry in between coats. If you see any runs in your finish coat, you should lightly sand the runs out with fine sandpaper and then repaint over the sanded areas.
Painting your paneling is a great way to update any room. Just follow these steps and it can change the look of the dull, drab paneling, making it much warmer and more modern. Painting paneling isn’t very difficult but there are a few important steps to take before you begin painting.It never fails, you know what you are going to buy but as soon as you see all the selection available you no longer remember what you want the room to look like. Stores have that affect on everyone looking for paint for their room. Adding all the colored swatches in a certain area can be very confusing to the eyes and change the way you see something. Now you will need to sift through all the colors to locate the one that you like the most.
We always recommend an insured company over a D.I.Y for painting and sanding to protect your home and its value. Visit https://www.ameritekpainting.com for more information on professional painters.  
#ProfessionalPaintingcompany #Painters #HireAProfessional #PaintingCompanyParker